GW Instek GDS-3000 Series Programming Manual - Manual (Page 65)

COMMAND DETAILS
65
Example :MEASure:SOURce1 CH 1
:MEASure:AVERage?
1.82E-3
Selects Channel 1, and then measures the average
value.
:MEASure:HIGH
Query
Description Returns the high voltage/current.
Syntax :MEASure:HIGH{?}
Return parameter Returns the high value as
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:HIGH?
3.68E-3
Selects Channel 1, and then measures the high
voltage/current.
:MEASure:LOW
Query
Description Returns the low voltage/current.
Syntax :MEASure:LOW{?}
Return parameter Returns the global low value as
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:LOW?
1.00E-0 Selects Channel 1, and
then measures the low
current.