GW Instek GDS-3000 Series Programming Manual - Manual (Page 84)

GDS-3000 Programming Manual
84
Syntax :TRIGger:HLEVel { | ?}
Parameter High level value
Return parameter Returns the trigger high level as .
Example :TRIGger:HLEVel 3.30E-1
Sets the trigger high level to time to 330mV/mA.
:TRIGger:LLEVel
Set
Query
Description Sets or queries the low trigger level (applicable for
Rise and Fall/Pulse Runt trigger).
Syntax :TRIGger:LLEVel { | ?}
Parameter Low level value
Return parameter Returns the trigger low level as .
Example :TRIGger:LLEVel -3.30E-3
Sets the trigger low level to time to -330mV/mA.
:TRIGger:EDGe:SLOP
Set
Query
Description Sets or queries the trigger slope.
Syntax :TRIGger:EDGe:SLOP {RISe | FALL | ?}
Parameter RISe Rising slope
FALL Falling slope
Return parameter Returns the trigger slope.
Example :TRIGger:EDGe:SLOP FALL
Sets the trigger slope to falling.
:TRIGger:DELay:TYPe
Set
Query
Description Sets or queries trigger delay type.
Syntax :TRIGger:DELay:TYPE {TIMe | EVENt | ?}