GW Instek GDS-3000 Series Programming Manual - Manual (Page 37)

COMMAND DETAILS
37
:CHANnel:BWLimit
Set
Query
Description Selects or returns the bandwidth limit on/off.
Syntax :CHANnel:BWLimit {FULL | | ?}
Parameter Channel Limit
1/2/3/4 CH1/2/3/4 20E+6 20MHz
FULL Full bandwidth 100E+6 100MHz
200E+6 200MHz
350E+6 350MHz
Return Parameter Returns the bandwidth.
Full Full bandwidth for the oscilloscope.
Example :CHANnel1:BWLimit 2.000E+07
Sets the channel 1 bandwidth 20MHz
:CHANnel:COUPling
Set
Query
Description Selects or returns the coupling mode.
Syntax CHANnel:COUPling {AC | DC | GND | ?}
Parameter Channel Coupling mode
1/2/3/4 CH1/2/3/4 AC AC coupling
DC DC coupling
GND Ground coupling
Return parameter Returns the coupling mode.
Example :CHANnel1:COUPling DC
Sets the coupling to DC for Channel 1.
:CHANnel:DESKew
Set
Query
Description Sets the deskew time in seconds.