GW Instek GDS-3000 Series Programming Manual - Manual (Page 101)

COMMAND DETAILS
101
Example :TEMPlate:MAXimum REF1
Saves the maximum template to REF1.
:TEMPlate:MINimum
Set
Query
Description Defines or queries which waveform memory
(REF1 or W1~W20) is set to the minimum
template.
Syntax :TEMPlate:MINimum{REF2|W1~W20|?}
Parameter/
Return Parameter REF2 Reference one
W1~W20 Waveform memory 1 to 20
Example :TEMPlate:MINimum REF2
Saves the minimum template to REF2.
:TEMPlate:POSition:MAXimum
Set
Query
Description Sets or queries the position of the maximum
template.
Syntax :TEMPlate:POSition:MAXimum{NR2|?}
Parameter Desired template position (-12.0 ~ +12.0
divisions)
Return parameter Returns the position in the following format:
“Div”
Example :TEMPlate:POSition:MAXimum 3.00
Sets the maximum template position to 3.00
divisions.
:TEMPlate:POSition:MINimum
Set
Query
Description Sets or queries the position of the minimum
template.
Syntax :TEMPlate:POSition:MAXimum{NR2|?}