GW Instek GDS-3000 Series Programming Manual - Manual (Page 36)

GDS-3000 Programming Manual
36
Autoscale Commands
:AUTOSet ..................................................................... 36
:AUTORange ................................................................ 36
:AUTOSet
Set
Description Runs the Autoset function to automatically
configure the horizontal scale, vertical scale, and
trigger according to the input signal.
Syntax :AUTOSet
:AUTORange
Set
Description Runs the Autorange function to automatically
continuously configure the horizontal and vertical
scale according to the input signal.
Syntax :AUTORange
Vertical Commands
:CHANnel:BWLimit ............................................... 37
:CHANnel:COUPling ............................................. 37
:CHANnel:DESKew ................................................ 37
:CHANnel:DISPlay ................................................. 38
:CHANnel:EXPand ................................................. 38
:CHANnel:IMPedance ........................................... 39
:CHANnel:INVert ................................................... 39
:CHANnel:POSition ............................................... 39
:CHANnel:PROBe:RATio ....................................... 40
:CHANnel:PROBe:TYPe ......................................... 40
:CHANnel:SCALe ................................................... 41