GW Instek GDS-3000 Series Programming Manual - Manual (Page 56)

GDS-3000 Programming Manual
56
:DISPlay:WAVEform
Set
Query
Description Sets or queries whether the waveforms are drawn
as vectors or dots.
Syntax :DISPlay:WAVEform {VECTor | DOT | ?}
Parameter VECTor Vectors DOT Dots
Return parameter Returns VECT or DOT.
Example :DISPlay:WAVEform VECTor
Sets the waveform to vectors.
Hardcopy Commands
:HARDcopy:START ...................................................... 56
:HARDcopy:MODe ...................................................... 56
:HARDcopy:PRINTINKSaver ....................................... 57
:HARDcopy:SAVEINKSaver ......................................... 57
:HARDcopy:SAVEFORMat .......................................... 57
:HARDcopy:START
Set
Description Hardcopy start is the equivalent of pressing the
Print key on the front panel.
Syntax :HARDcopy:START
:HARDcopy:MODe
Set
Query
Description Sets or queries whether hardcopy is set to print or
save.
Syntax :HARDcopy:MODe {PRINT|SAVE|?}
Parameter PRINT Print mode SAVE Save mode
Return parameter Returns the mode .(PRINT/SAVE)