GW Instek GDS-3000 Series Programming Manual - Manual (Page 66)

GDS-3000 Programming Manual
66
:MEASure: MAX
Query
Description Returns the maximum amplitude.
Syntax :MEASure:MAX{?}
Return parameter Returns the maximum amplitude as
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:MAX?
1.90E-3
Selects Channel 1, and then measures the
maximum amplitude.
:MEASure:MIN
Query
Description Returns the minimum amplitude.
Syntax :MEASure:MIN{?}
Return parameter Returns the minimum amplitude as .
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH 1
:MEASure:MIN?
-8.00E-3
Selects Channel 1, and then measures the
minimum amplitude.
:MEASure:PK2PK
Query
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude).
Syntax :MEASure:PK2Pk{?}