GW Instek GDS-3000 Series Programming Manual - Manual (Page 102)

GDS-3000 Programming Manual
102
Parameter Desired template position (-12.0 ~ +12.0
divisions)
Return parameter Returns the position in the following format:
“Div”
Example :TEMPlate:POSition:MINimum 3.00
Sets the minimum template position to 3.00
divisions.
:TEMPlate:SAVe:MAXimum
Set
Description Saves the maximum template.
Syntax :TEMPlate:SAVe:MAXimum
:TEMPlate:SAVe:MINimum
Set
Description Saves the maximum template.
Syntax :TEMPlate:SAVe:MINimum
:TEMPlate:TOLerance
Set
Query
Description Sets or queries the tolerance as a percentage.
Syntax :TEMPlate:TOLerance{NR2|?}
Parameter/
Return Parameter The auto tolerance range (0.4% ~ 40%)
Example :TEMPlate:TOLerance 10
Sets the tolerance to 10%.
:TEMPlate:SAVe:AUTo
Set
Description Saves the AUTO template (maximum and
minimum templates).
Syntax :TEMPlate:SAVe:AUTo