SilentKnight VisorAlarm Plus 2U - Manual (Page 62)

VISORALARM - Appendices
IV - 60
Doc.DM374-I
Ver.1.0
2.3. VisorALARM Expansion Card Connectors
a) COM1/COM2 connectors
The VisorALARM needs special wires that are supplied with the device and are used with these
connectors. These wires have a SUBD-9 V.24 termination.
b) I/O connector
WARNING: For UL Listed installation the equipments connected to COM1/COM2
connectors and I/O connector are restricted to be in the same room as the
VisorALARM PLUS 2U
DB25
Connector
V.24
Pin Signal UIT
1 CD 109
2 RXD 104
3 TXD 103
4 DTR 108.2
5 Ground 102
6 DSR 107
7 RTS 105
8 CTS 106
9 RI 125
Pines Signal
Output1 Relay
RV:30Vcc
RA:2A
Output2 Relay
RV:30Vcc
RA:2A
Input1 +12V/-12V
Input2 +12V/-12V