SilentKnight VisorAlarm Plus 2U - Manual (Page 20)

VISORALARM - Installation
II - 18
Doc.DM374-I
Ver.1.0
**************************************************
**************************************************
**************************************************
BOOT CODE VERSION: 01.10 Oct 30 2006 17:17:43
gzip Oct 30 2006 17:08:44
P.C.B.: 75 MASK:0A01 Microcode:0070
START FROM FLASH
BIOS CODE DUMP.....................
BIOS DATA DUMP....
End of BIOS dump
Boot-stack used: 0x00000788
Boot-stack free: 0x00001878
BIOS CODE VERSION: 01.10
CLK=294912 KHz BUSCLK=65536 KHz PCICLK=32768 KHz L1
Date: 11/20/06, Monday Time: 17:28:05
SDRAM size: 128 Megabytes
BANK 0: 128 Megabytes (detected)
I_Cache: ON
D_Cache: ON Write-Back
FLASH: 16 Mb.
NVRAM: 128 Kb.
EEPROM: 2048 Bytes.
DPRAM: 16384 Bytes.
WAN1: DCE
WAN2: DCE
ISAC
RDSI_B
RDSI_B
FAST ETHERNET 1
FAST ETHERNET 2
PCI device: Host bridge
(Bus: 0, Device: 0, Function: 0)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
Slot 1 - PCI device: bridge
(Bus: 0, Device: 10, Function: 0)
(Subs. Vendor: 0x5444, Subs. Device: 0x2301)
Current production date: 06 05
Current software license: 6 120
Current serial number: 472/05898
BIOS MAC Add: 00-a0-26-70-17-0a
>>
........
TRYING APP CODE DUMP
(CONFIGURED) cit.bin ver.: 0.10.6.27 0.0.0.0 ................................
................................................................................
.........................................................................
APP DATA DUMP...................................................................
............
Bios-stack used: 0x1498
Bios-stack free: 0x2B68
Aux-stack used: 0x124
Aux-stack free: 0x1EDC
Running application
Flash configuration read
Initializing
Press any key to get started