SilentKnight VisorAlarm Plus 2U - Manual (Page 24)

VISOR ALARM – Configuration
III - 22
Doc.DM374-I
Ver.1.0
(CONFIGURED) cit.bin ver.: 0.10.6.27 0.0.0.0 ................................
................................................................................
.........................................................................
APP DATA DUMP...................................................................
............
Bios-stack used: 0x1498
Bios-stack free: 0x2B68
Aux-stack used: 0x124
Aux-stack free: 0x1EDC
Running application
Flash configuration read
Initializing
Press any key to get started
The device prompts the user for the login and password to gain access to the configuration. The
factory configuration for the login/password is “manager/24680”.
Press any key to get started
User: manager
Password: *****
Teldat (c)2001-2006
Router model VISORALARM-PLUS US 6 120 CPU MPC8260 S/N: 472/05898
2 LAN, 4 WAN Lines
CIT software version: 10.6.27-Alfa Nov 17 2006 17:05:13
*
The next step is to enter the configuration through the “process 4” or “config” command.
Teldat (c)2001-2006
Router model VISORALARM-PLUS US 6 120 CPU MPC8260 S/N: 472/05898
2 LAN, 4 WAN Lines
CIT software version: 10.6.27-Alfa Nov 17 2006 17:05:13
*config
Config>
The way to display the current receiver configuration is through the “show configuration” command as
shown below:
Config>show configuration