SilentKnight VisorAlarm Plus 2U - Manual (Page 4)

VISORALARM - Introduction
I - 2
Doc.DM374-I
Ver. 1.0
1. VisorALARM PLUS 2U Introduction
The IP VisorALARM PLUS 2U receiver (Model VisorALARM PLUS 2U) is a communications
device developed by Teldat for security environments. The IP VisorALARM PLUS 2U receiver’s
principal task is to receive alarms over an IP network and to subsequently send them to an automation
software (SwAut). The functionality of the Teldat VisorALARM PLUS 2U is similar to any other
alarm receiver which receives alarms over the telephone line.
The IP VisorALARM PLUS 2U receiver operates together with the IP Module (mIP/IPDACT), which
receives the alarms from the alarm control panels and sends them to the Teldat VisorALARM PLUS
2U over an IP network. Additionally, the Teldat VisorALARM PLUS 2U monitors connectivity with
all the registered mIP/IPDACTs. Should connectivity fail then the VisorALARM PLUS 2U generates
alarms to the SwAut.
The VisorALARM PLUS 2U IP receiver has the network backup functionality added, which permits
an mIP/IPDACT the possibility of IP backup towards another IP receiver. The main (or primary)
receiver and the backup receiver are always synchronized at the configuration level.
The VisorALARM PLUS 2U is supplied with a display and a keypad in order to validate the signals
received and monitor the device. The VisorALARM PLUS 2U includes interfaces to connect to an
Automation Software and to a printer.
The user can access to the device configuration through an asynchronous serial data connection by
using a serial terminal emulator. The configuration is a text level and permits the copy/paste
functionality.
Figure 1. VisorALARM PLUS 2U 2U Receiver