Brocade FastIron Ethernet Switch IP Multicast Configuration Guide User Manual

Page 34

Displaying the active interface with no other querier present

The following example shows the output in which the VLAN interface is active and no other querier is
present with the lowest IP address.

device#show ip multicast vlan 10

Version=2, Intervals: Query=125, Group Age=260, Max Resp=10, Other Qr=260

VL10: dft

V2, vlan cfg active, 0 grp, 0 (*G) cache, no rtr port,

1/1/16 has 0 groups,

This interface is Querier

default V2

1/1/24 has 0 groups,

This interface is Querier

default V2

2/1/16 has 0 groups,

This interface is Querier

default V2

2/1/24 has 0 groups,

This interface is Querier

default V2

3/1/1 has 0 groups,

This interface is Querier

default V2

3/1/4 has 0 groups,

This interface is Querier

default V2

Syntax: show ip multicast vlan vlan-id

If you do not specify a vlan-id , information for all VLANs is displayed.

Displaying the passive interface with no other querier present

The following example shows the output in which the VLAN interface is passive and no other querier is
present with the lowest IP address.

device#show ip multicast vlan 10

Version=2, Intervals: Query=125, Group Age=260, Max Resp=10, Other Qr=260

VL10: dft V2, vlan cfg passive, 0 grp, 0 (*G) cache, no rtr port,

1/1/16 has 0 groups,