beautypg.com

Displaying mld group information, Displaying mld definitions for an interface – Brocade FastIron Ethernet Switch IP Multicast Configuration Guide User Manual

Page 204

background image

Displaying MLD group information

To display the list of multicast groups, enter a command such as the following.

device #show ipv6 mld group

Total 2 groups

-------------------------------------------------------------------------------------

-

Idx Group Address Port Intf GrpCmpV Mode Timer

Srcs

----+----------------------------------------+------+------+-------+-------+-----

+----

1 ff05::4422 e3/1/1 v170 Ver1 exclude 221

0

2 ff3f::300 e3/1/1 v170 Ver2 include 0

1

Total number of groups 2

Syntax: show ipv6 mld [ vrf vrf-name ] group

The vrf parameter allows you to display the list of IPv6 MLD groups for the VRF instance identified by
the vrf-name variable.

The following table displays the output from the show ipv6 mld group command.

Output from the show ipv6 mld group command

TABLE 41

Field

Description

IDX

Index for the MLD group.

Group Address

IPv6 address of the multicast group.

Port

The physical port to which the group belongs.

Intf

The routing interface to which the port belongs.

GrpCmpV

The version of the MLD group report message.

Mode

Indicates if the filter mode of the multicast group is in INCLUDE or EXCLUDE.

Timer

The number of seconds the interface can remain in its current mode.

Total number of groups

The total number of MLD groups.

Displaying MLD definitions for an interface

To display the MLD parameters on an interface, including the various timers, the current querying
router, and whether or not MLD is enabled, enter the following command.

Brocade#show ipv6 mld interface

---------+------+---------+---------------------------------------+--

Intf/Port|Groups| Version | Querier | Timer |V1Rtr| Tracking

| |Oper Cfg| |OQrr GenQ| |

---------+------+----+----+---------------------------------------+--

e1/1/1 0 2 - Self 0 0 No Disabled

v40 0 2 - Disabled

e3/1/1 1 2 - Self 0 0 No

e2/1/1 1 2 - Self 0 0 No

e1/1/1 1 2 - Self 0 0 No

v50 0 2 - Disabled

Displaying MLD group information

202

FastIron Ethernet Switch IP Multicast Configuration Guide

53-1003085-02