Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 191)

pim/dvm intf. group 64 0 64 0 14848 0 24 64
pim/dvm global group 512 0 512 0 14848 6700 46 64
repl entry(Global) 1024 2 1022 0 237568 40644 49 1024
MLD Resources(All Vrfs):
groups 1024 0 1024 0 4096 7100 328 256
phy-ports 2048 0 2048 0 4096 7600 148 256
exist-phy-port 1792 0 1792 0 12992 196484 62 56
group-query 56 0 56 0 12992 0 84 56
Hardware-related Resources:
Total (S,G) entries 2
Total SW FWD entries 0
Total sw w/Tag MVID entries 0
Total sw w/Tag invalid MVID entries 0
Total HW FWD entries 2
Total hw w/Tag MVID entries 2
Total hw w/Tag invalid MVID entries 0
Brocade#
Syntax: show ipv6 pim [ all-vrf | [ vrf vrf-name ] ] resource
The vrf parameter allows you to display hardware resource information for the VRF instance identified
by the vrf-name variable.
The following table displays the output from the show ipv6 pim resource command.
Output from the show ipv6 pim resource command TABLE 37
Field Description
Num alloc Number of allocated PIM resources.
System max Maximum number of VRF resources.
Size Internal size.
alloc Number of nodes of that data that are currently allocated in memory.
in-use Number of allocated nodes in use.
avail Number of allocated nodes are not in use.
get-fail Number of allocated notes that failed.
limit Maximum number of nodes that can be allocated for a data structure. This may or may not be
configurable, depending on the data structure
get-mem Current memory allocation.
size Unit size.
init Initial number.
To display usage and fail-count information for SG entries on each VRF, use the show ipv6 pim all-vrf
hw-resource command.
device# show ipv6 pim all-vrf hw-resource
VRF In-Use Fail
default-vrf 3072 8
blue 3072 0
-------------------------------
Total usage 6144
IPv6 Multicast Protocols
FastIron Ethernet Switch IP Multicast Configuration Guide 189
53-1003085-02