Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 136)

Displaying MSDP Peer
To display MSDP peer information, enter the following command.
Brocade# show ip msdp peer 40.40.40.3
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out In Out In Out
40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7
Brocade#
Syntax: show ip msdp peer peer-addr
Displaying MSDP VRF RPF-Peer
To display MSDP peer information for a specific VRF, enter the following command.
Brocade#sh ip msdp vrf Blue rpf-peer 40.40.40.2
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out
In Out In Out
40.40.40.2 1001 ESTABLISH 5569 5568 0 0 0 0 57
Syntax: show ip msdp vrf VRF-name rpf-peer ip-addr
Clearing MSDP information
You can clear the following MSDP information:
• Peer information
• Source active cache
• MSDP statistics
Clearing peer information
To clear MSDP peer information, enter the following command at the Privileged EXEC level of the CLI.
device# clear ip msdp peer 205.216.162.1
Syntax: clear ip msdp peer [ip-addr ]
The command in this example clears the MSDP peer connection with MSDP router 205.216.162.1.
The CLI displays a message to indicate when the connection has been successfully closed. To clear
all the peers, omit the ip-addr variable from the command.
Clearing peer information on a VRF
To clear the MSDP VRF peers, enter the following command at the MSDP VRF configuration level.
device#clear ip msdp vrf blue peer 207.207.162.5
Syntax: clear ip msdp [vrf vrf-name ] peer [ ip-addr ]
Displaying MSDP Peer
134 FastIron Ethernet Switch IP Multicast Configuration Guide
53-1003085-02