beautypg.com

Route-precedence admin-distance, Show ip mroute, Route-precedence admin-distance show ip mroute – Brocade FastIron Ethernet Switch IP Multicast Configuration Guide User Manual

Page 222

background image

You must configure four parameters indicating the four different route types. If you want to specify that a
particular route type not be used, configure the none keyword to fill the precedence table.

Examples

This command specifies a non-default route from the mRTM, then a non-default route from the uRTM,
then a default route from the mRTM, and then a default route from the uRTM.

Device(config)# router pim

Device(config-pim-router)# route-precedence mc-non-default uc-non-default mc-default

uc-default

This command specifies that the unicast default route be ignored.

Device(config)# router pim

Device(config-pim-router)# route-precedence mc-non-default mc-default uc-non-default

none

History

Release version

Command history

8.0.10a

This command was introduced.

route-precedence admin-distance

Specifies that multicast routes are selected from the best route from the multicast routing table
(mRTM) and the unicast routing (uRTM) table.

Syntax

route-precedence admin-distance

no route-precedence admin-distance

Command Default

The default is route-precedence mc-non-default mc-default uc-non-default uc-default.

Modes

PIM configuration mode

Usage Guidelines

The no form of this command removes the configuration and restores the default route precedence
settings.

If both the mRTM and the uRTM have routes of equal cost, the route from the mRTM is preferred.

Examples

The following example shows how to specify that the best multicast route from the mRTM and uRTM
tables is selected.

Device(config-pim-router)#route-precedence admin-distance

History

Release version

Command history

8.0.10a

This command was introduced.

show ip mroute

Displays information on multicast routes. You can specify whether you want to display information
from static or connected mroutes or from a particular mroute.

Syntax

show ip mroute [vrf vrf-name ] [ static | connected] | [ ip-subnet [ mask]]

Parameters

vrf

vrf-name

route-precedence admin-distance

220

FastIron Ethernet Switch IP Multicast Configuration Guide

53-1003085-02