beautypg.com

Displaying ipv6 pim rpf, Displaying ipv6 pim counters – Brocade FastIron Ethernet Switch IP Multicast Configuration Guide User Manual

Page 189

background image

Output parameters of the show ipv6 pim mcache command (Continued)

TABLE 35

Field

Description

Flags

Show the flags associated with the forward entry.

slow ports ethe

Shows the forwarding port ID of the mcache entry which is in the software forwarding
path.

AgeSltMsk

Shows the slot number on which MP expects ingress traffic.

L2 FID

Shows the hardware resource allocated for the traffic switched to receivers in the
ingress VLAN.

DIT

Shows the hardware resource allocated for routed receivers.

AvgRate

Shows the average data traffic rate for the mcache entry

profile

Shows the profile ID associated with the stream.

Forwarding_oif

Shows the number of outgoing interfaces of the mcache entry.

immediate_oifs

Shows the local immediate outgoing interface of the mcache entry.

blocked_oifs

Shows the PIM Sparse mode blocked outgoing interfaces.

L3 (SW) 1

Shows whether the traffic is switched or routed out of the interface.

L3 (HW) 1

The forwarding entries by using hardware.

Src-Vlan

VLAN associated with the ingress interface.

Displaying IPv6 PIM RPF

The show ipv6 pim rpf command displays what PIM sees as the reverse path to the source. While
there may be multiple routes back to the source, the one displayed by the show ipv6 pim rpf command
is the one that PIM thinks is best.

device# show ipv6 pim rpf 2008:165::1010

upstream nbr 2006:503::1001 on v503

Syntax: show ipv6 pim [ vrf vrf-name ] rpf ip-address

The vrf parameter allows you to display what PIM sees as the reverse path to the source for a VRF
instance specified by the vrf-name variable.

The ip-address variable specifies the source address for RPF check.

Displaying IPv6 PIM counters

You can display the number of default-vlan-id changes that have occurred since the applicable VRF
was created and how many times a tagged port was placed in a VLAN since the applicable VRF was
created, as shown in the following example.

Displaying IPv6 PIM RPF

FastIron Ethernet Switch IP Multicast Configuration Guide

187

53-1003085-02