Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 212)

Modes Privileged EXEC mode
Usage Guidelines After mroutes are cleared from an IP multicast routing table, the best static mroutes are added back to
it.
Examples This example removes all mroutes from the IP multicast routing table:
Device(config)# clear ip mroute
This example removes all mroutes from the vrf green IP multicast routing table:
Device(config)# clear ip mroute vrf green
This example removes mroute 10.0.0.2/24 from the IP multicast routing table:
Device(config)# clear ip mroute 10.0.0.2/24
History
Release version Command history
8.0.10a This command was introduced.
clear ipv6 mroute
Removes IPv6 multicast routes from the mRTM.
Syntax clear ipv6 mroute [ vrf vrf-name] | [ ipv6-address-prefix/prefix-length ]
Parameters vrf vrf-name
Specifies a VRF route.
ipv6-address-prefix/prefix-length
Specifies an IPv6 address prefix in hexadecimal using 16-bit values between colons as
documented in RFC 2373 and a prefix length as a decimal value.
Modes Privileged EXEC mode
Usage Guidelines After mroutes are removed from an IPv6 multicast routing table, the best static mroutes are added back
to it.
Examples This example removes all mroutes from the IPv6 multicast routing table:
Device(config)# clear ipv6 mroute
This example removes all mroutes from the vrf green IPv6 multicast routing table:
Device(config)# clear ipv6 mroute vrf green
This example removes mroute 2000:7838::/32 from the IPv6 multicast routing table:
Device(config)# clear ipv6 mroute 2000:7838::/32
History
Release version Command history
8.0.10a This command was introduced.
clear ipv6 mroute
210 FastIron Ethernet Switch IP Multicast Configuration Guide
53-1003085-02