Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 13)

About This Guide
● Introduction..................................................................................................................... 11
● What’s new in this document.......................................................................................... 11
● How command information is presented in this guide.....................................................12
Introduction
This guide includes procedures for configuring the software. The software procedures show how to
perform tasks using the CLI. This guide also describes how to monitor Brocade products using statistics
and summary screens.
Supported hardware
This guide supports the following product families from Brocade:
• FastIron X Series devices (chassis models):
‐ FastIron SX 800
‐ FastIron SX 1600
• Brocade FCX Series (FCX) Stackable Switch
• Brocade ICX ™ 6610 (ICX 6610) Stackable Switch
• Brocade ICX 6430 Series (ICX 6430)
• Brocade ICX 6450 Series (ICX 6450)
• Brocade ICX 6650 Series (ICX 6650)
• Brocade ICX7750 Series (ICX7750)
NOTE
The Brocade ICX 6430-C switch supports the same feature set as the Brocade ICX 6430 switch unless
otherwise noted.
NOTE
The Brocade ICX 6450-C12-PD switch supports the same feature set as the Brocade ICX 6450 switch
unless otherwise noted.
What’s new in this document
Support is added for static mroute.
FastIron Ethernet Switch IP Multicast Configuration Guide 11
53-1003085-02