Brocade FastIron Ethernet Switch Software Upgrade Guide User Manual
Page 95
show command output differences between 07.4.00 and 08.0.xx
show tech-
support
stack
Brocade#sh tech-support stack
Stacking Status.
alone: standalone, D: dynamic config, S: static config
ID Type Role Mac Address Pri State Comment
1 S ICX6610-24F standby 748e.f834.8198 0 remote Ready
2 S ICX6610-24 active 748e.f893.4e1c 0 local Ready
active standby
+---+ +---+
=2/6| 2 |2/1==2/6| 1 |2/1=
| +---+ +---+ |
| |
|------------------------|
Standby u1 - protocols ready, can failover or manually switch over
Current stack management MAC is 748e.f834.8199
Image-Auto-Copy is Enabled.
Stack Port Status Neighbors
Unit# Stack-port1 Stack-port2 Stack-port1 Stack-port2
1 up (1/2/1-1/2/2) up (1/2/6-1/2/7) U2 (2/2/6-2/2/7) U2 (2/2/1-
2/2/2)
2 up (2/2/1-2/2/2) up (2/2/6-2/2/7) U1 (1/2/6-1/2/7) U1 (1/2/1-
1/2/2)
Unit# System uptime
1 2 days 20 hours 57 minutes 35 seconds
2 2 days 21 hours 33 seconds
Stack Resource information.
alloc in-use avail get-fail limit get-mem
size init
register attribute 19200 13636 5564 0 556800 18708
336 2400
general 12B data 32 2 30 0 7424 3
12 32
RB-tree node 16384 13641 2743 0 237568 14114
18 1024
Some extra
information is
added in "sh tech-
support stack"
output.
show ip
bgp
filtered-
routes as-
path-
access-
list STR
Brocade#sh ip bgp filtered-routes as-path-access-list Block
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-
MULTIPATH
S:SUPPRESSED F:FILTERED s:STALE
Prefix Next Hop MED LocPrf Weight
Status
1 42.42.42.42/32 103.1.1.1 0 100 0
EF
AS_PATH: 5
2 42.42.42.42/32 106.1.1.1 0 100 0
EF
AS_PATH: 5
Status string m:
not-local-multipath
is changed to m:
not-installed-
multipath.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01