Example of manifest file upgrade – Brocade FastIron Ethernet Switch Software Upgrade Guide User Manual

Page 35

For example:

Brocade # copy tftp system-manifest 192.168.10.12 manifest.txt primary

You can use the all-images-primary and all-images-secondary options to copy all the images.

NOTE
Copying manifest file using SCP is not supported.

NOTE
For standalone devices or homogenous stack, the manifest upgrade process will download the
boot image to the device only if a newer boot image version is available for upgrade.

The manifest file specifies images for both router and switch types. Depending on the device family
and the type of image (switch or router image), the appropriate images are installed.

After all the relevant images have been installed on the device, you will be prompted to reboot the
device to complete the upgrade process.

Example of manifest file upgrade

Brocade#copy tf sys 10.20.65.49 FI08000B3_Manifest.txt all-images-primary

You are about to download boot image and boot signature image as well, ARE YOU SURE?

(enter 'y' or 'n'): y

Brocade#Flash Memory Write (8192 bytes per dot) .

DOWNLOADING MANIFEST FILE Done.

Brocade#Flash Memory Write (8192 bytes per dot)

Automatic copy to member units: 2

DOWNLOAD OF ICX6610 BOOT SIGNATURE Done.

Brocade#Load to buffer (8192 bytes per dot)

Automatic copy to member units: 2

................................................................Write to boot flash..

DOWNLOAD OF ICX6610 BOOT Done.

Brocade#Flash Memory Write (8192 bytes per dot)

Automatic copy to member units: 2

Copy ICX6610 signature from TFTP to Flash Done

Brocade#Flash Memory Write (8192 bytes per dot)

Automatic copy to member units: 2

......................................................................................

....................................................................

WARNING: New user connected to this port.

Current number of users: 5

......................................................................................

...................................................................................

Copy ICX6610 from TFTP to Flash Done.

Brocade#Flash Memory Write (8192 bytes per dot)

Automatic copy to member units: 3 4 5 7 8

COPY ICX6450 SIGNATURE TFTP to Flash Done .

Brocade#Flash Memory Write (8192 bytes per dot)

Automatic copy to member units: 3 4 5 7 8

......................................................................................

Example of manifest file upgrade

FastIron Ethernet Switch Software Upgrade Guide

53-1003089-02