Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 61)

show command output differences between 07.4.00 and 08.0.xx
show ip
pim
resource
PIM IPV4 CLASS Num alloc:1, System max:17, Size:378155
Vrf Instance : default-vrf
--------------------------------------
alloc in-use avail get-fail limit get-mem
size init
NBR list 256 5 251 0 512 17
96 256
RP set list 256 1 255 0 1536 1480
49 256
Static RP 64 0 64 0 64 0
42 64
LIF Entry 512 0 512 0 512 0
47 512
Anycast RP 64 0 64 0 64 0
190 64
timer 256 0 256 0 59392 26
64 256
prune 128 0 128 0 29696 0
34 128
pimsm J/P elem 1024 0 1024 0 48960 8687
29 1024
Timer Data 256 118 138 0 59392 589
28 256
mcache SLIB Sync 1280 0 1280 0 296960 13464
34 1280
mcache 1024 605 419 0 4096 794
1144 256
graft if no mcache 197 0 197 0 45704 0
64 197
HW replic vlan 2000 133 1867 0 464000 624
66 2000
HW replic port 1024 133 891 0 237568 624
81 1024
pim/dvm intf. group 256 0 256 0 59392 0
24 256
pim/dvm global group 256 1 255 0 59392 1
46 256
repl entry(Global) 1024 7 1017 0 237568 601
VRF category, ITC,
etc. are added.
show ip
pim group
Brocade#show ip pim group
Total number of groups for VRF default-vrf: 1
1 Group 226.1.1.1
Group member at e2/3/4: v90
VRF information
category is added.
show ip
bgp peer-
group STR
Brocade#show ip bgp peer-group STR
1 BGP peer-group is STR
Address family : IPV4 Unicast
activate
Address family : IPV4 Multicast
no activate
Address family : IPV6 Unicast
no activate
Address family : IPV6 Multicast
no activate
Address family : VPNV4 Unicast
no activate
Address family : L2VPN VPLS
no activate
Members:
IP Address: 125.1.1.1, AS: 5
"activate" or "no
activate"
information is
added for Address-
family.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01