Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 74)

show command output differences between 07.4.00 and 08.0.xx
show ip
ospf area
1.2.3.4
database
link-state
extensive
Brocade#sh ip ospf area 0.0.0.200 database link-state extensive
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Rtr 192.168.98.111 192.168.98.111 800001cc 874
0xb3ba Done
LSA Header: options: 0x02, seq-nbr: 0x800001cc, length: 72,
flags:0x0500
link id = 193.213.111.213, link data = 193.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.113.111.113, link data = 192.113.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.213.111.213, link data = 192.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 193.113.111.0, link data = 255.255.255.0, type = stub(3)
tos count = 0, tos0_metric = 1
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Rtr 192.168.98.213 192.168.98.213 8000001c 337
0xb67f Done
LSA Header: options: 0x02, seq-nbr: 0x8000001c, length: 3072,
flags:0x0700
link id = 192.168.98.213, link data = 255.255.255.255, type = stub(3)
tos count = 0, tos0_metric = 1
link id = 192.169.98.113, link data = 255.255.255.255, type = stub(3)
tos count = 0, tos0_metric = 1
link id = 193.213.111.213, link data = 193.213.111.213, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.213.111.213, link data = 192.213.111.213, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.213.101.0, link data = 255.255.255.0, type = stub(3)
tos count = 0, tos0_metric = 1
link id = 192.213.1.2, link data = 255.255.255.254, type = stub(3)
tos count = 0, tos0_metric = 1
The output format
is different. And,
new "sync state"
field is added.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01