Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 70)

show command output differences between 07.4.00 and 08.0.xx
show auth-
mac-
addresses
detailed
ethernet ?
Brocade#sh auth-mac-addresses detailed e 2/1/8
Port : 2/1/8
Dynamic-Vlan Assignment : Enabled
RADIUS failure action : Block Traffic
Failure restrict use dot1x : No
Override-restrict-vlan : Yes
Port Default VLAN : 1006 ( RADIUS assigned: Yes) (1006)
Port Vlan State : RADIUS VLAN
802.1x override Dynamic PVID : NO
Original PVID : 1
DOS attack protection : Disabled
Accepted Mac Addresses : 1
Rejected Mac Addresses : 0
Authentication in progress : 0
Authentication attempts : 0
RADIUS timeouts : 0
RADIUS timeouts action : Retry
MAC Address on PVID : 1
MAC Address authorized on PVID : 1
Aging of MAC-sessions : Enabled
Port move-back vlan : Port-configured-vlan
Max-Age of sw mac session : 120 seconds
hw age for denied mac : 70 seconds
MAC Filter applied : No
Dynamic Acl applied : Yes( 103 )
default ACL ID on port : 0
number of dynamic ACL : 1
num Dynamic Tagged Vlan : 0
-------------------------------------------------------------------------
-----
MAC Address RADIUS Server Authenticated Time Age Dot1x
-------------------------------------------------------------------------
-----
54d1.1896.0000 10.20.79.121 Yes 00d00h01m57s Ena Ena
"Dynamic ACL
applied" field
shows correct
information in
FastIron 08.0.00a.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01