beautypg.com

Sample output - determining the software versions, Example for determining the flash image version – Brocade FastIron Ethernet Switch Software Upgrade Guide User Manual

Page 30

background image

NOTE
Please note that in this section the output is truncated only relevant portion of the output is displayed.
For detailed output, see the

Sample output - determining the software versions

on page 28 section.

1.

Determine the current boot image version using the show flash command

Brocade#show flash

Active Management Module (Slot 9):

Compressed Pri Code size = 3613675, Version 03.1.00aT3e3 (sxr03100a.bin)

Compressed Sec Code size = 2250218, Version 03.1.00aT3e1 (sxs03100a.bin)

Compressed BootROM Code size = 524288, Version 03.0.01T3e5

Code Flash Free Space = 9699328

2.

Determine the current flash image version using the show version command.

device#show version

Copyright (c) 1996-2012 Brocade Communications Systems, Inc. All rights reserved.

UNIT 1: compiled on Mar 2 2012 at 12:38:17 labeled as ICX64S07400

(10360844 bytes) from Primary ICX64S07400.bin

SW: Version 07.4.00T311

Boot-Monitor Image size = 774980, Version:07.4.00T310 (kxz07400)

HW: Stackable ICX6450-24

3.

Determine the current license installed using the show version command.

device#show version

...

License: BASE_SOFT_PACKAGE (LID: dbuFJJHiFFi)

P-ENGINE 0: type DEF0, rev 01

...

4.

Generate a new license, if required from

Software License

page on Brocade.com. If you are

upgrading to a different type of image that uses a different license from the one which is already
on the device, generate a separate license file. For more information on license, see the FastIron
Ethernet Switch Administration Guide
.

5.

Download the required software images from the

Downloads

page in MyBrocade web site. For the

exact list of software image files available for FastIron Release 08.0.xx, see the release notes.

Sample output - determining the software versions

Example for determining the flash image version

Enter the show version command at any level of the CLI. The following shows an example output:

device#show version

Copyright (c) 1996-2012 Brocade Communications Systems, Inc. All rights reserved.

UNIT 1: compiled on Mar 2 2012 at 12:38:17 labeled as ICX64S07400

(10360844 bytes) from Primary ICX64S07400.bin

SW: Version 07.4.00T311

Boot-Monitor Image size = 774980, Version:07.4.00T310 (kxz07400)

HW: Stackable ICX6450-24

==========================================================================

UNIT 1: SL 1: ICX6450-24 24-port Management Module

Serial #: BZSXXXXXXXX

License: BASE_SOFT_PACKAGE (LID: dbuFJJHiFFi)

P-ENGINE 0: type DEF0, rev 01

==========================================================================

UNIT 1: SL 2: ICX6450-SFP-Plus 4port 40G Module

==========================================================================

800 MHz ARM processor ARMv5TE, 400 MHz bus

65536 KB flash memory

Sample output - determining the software versions

28

FastIron Ethernet Switch Software Upgrade Guide

53-1003089-02