Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 80)

show command output differences between 07.4.00 and 08.0.xx
show
ipc_stats
Brocade#show ipc_stats
Total available Hsync channel space = 1572868
Total available Appl channel space = 1572868
Total number of application msgs in dyn queue = 0
Total number of hsync msgs in dyn queue = 0
Total number of rx pkt msgs in standby dynamic queue = 0
Total number of rx pkts relayed = 458429
Total number of rx pkts received = 0
Total number of dy-sync messages received so far = 0
Total number of rel-sync pending complete = 0
Total number of L3 baseline-sync packets = 1
Avg number of retries for packet send on IPC = 0
Is image_sync_in_progress? = 0
Is hotswap_in_progress? = 0
Is mgmt_hswap_in_progress? = 0
Total num of rx dyn queue drops = 0
Total num of jumbo corrupts = 0
Is l3_ip6_cleanup_not_done? = 0
Rel Sync Ready Status = 2
Is Console Access through Appl Task? = 1
Is reload required? = 0
Real-time yeilds = 0
Brocade#
The output is
modified.
show ipv6
memory
Brocade#show ipv6 memory
Memory Type Size Allocated Max-alloc Alloc-
Fails
MTYPE_TMP 0 0 0 0
MTYPE_ROUTE_TABLE 180 121 121 0
MTYPE_ROUTE_NODE 0 0 0 0
MTYPE_IF_PORT 120 22 22 0
MTYPE_IF_ADDRESS_CONFIG 23 27 27 0
MTYPE_IF_ADDRESS 56 66 66 0
MTYPE_IF_PREFIX 0 0 0 0
MTYPE_MC_ADDRESS 24 187 187 0
MTYPE_DEFAULT_ROUTE 0 0 0 0
MTYPE_ND6_NEIGHBOR_STATIC 0 0 0 0
MTYPE_ND6_DAD 22 0 34 0
MTYPE_ND6_PREFIX_ADV 0 0 0 0
MTYPE_LINK_LIST 0 0 0 0
MTYPE_LINK_NODE 0 0 0 0
MTYPE_ECHO_RESULTMTYPE_RI 0 0 0 0
0 0 0 0
MTYPE_RIPNG_PO
RT field is
removed. Also,
MTYPE_ECHO_RE
SULT fields are
different.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01