Brocade FastIron Ethernet Switch Software Upgrade Guide User Manual
Page 66
show command output differences between 07.4.00 and 08.0.xx
show
webauth
vlan 2
webpage
Brocade#sh who
Console connections:
established, monitor enabled, privilege super-user, in config
mode
you are connecting to this session
Telnet server status: Enabled
Telnet connections (inbound):
1 established, client ip address 10.120.35.95, user is rose,
privilege super-user
using vrf default-vrf.
4 seconds in idle
2 closed
3 closed
4 closed
5 closed
Telnet connection (outbound):
6 closed
7 closed
8 closed
9 closed
10 closed
SSH server status: Enabled
SSH connections:
SSH connections (inbound):
1 closed
2 closed
3 closed
4 closed
5 closed
SSH connection (outbound):
6 closed
7 closed
8 closed
9 closed
10 closed
HTTP server status: Enabled
HTTPS server status: Disabled
The ouput is more
detailed.
show ip
pim
interface
STR
ethernet
1/1
Brocade#sh ip pim interface e 1/1/7
---------+---------------+----+---+-----------------------+---+---------
+-------+------+---------+
Interface|Local |Ver |St | Designated Router
|TTL|Multicast| VRF | DR | Override
|Address | | |Address Port|Thr|Boundary
| | Prio | Interval
---------+---------------+----+---+-----------------------+---+---------
+-------+------+---------+
e1/1/7 33.0.0.6 SMv2 Ena Itself 1 None
default 1 3000ms
Total Number of Interfaces : 1
Brocade#
The output is
modified and it
now also shows
VRF information.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01