Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 90)

show command output differences between 07.4.00 and 08.0.xx
show ip
rip route
Brocade#show ip rip route
RIP Routing Table - 8 entries:
1.1.1.1/32, from 0.0.0.0, null (0)
CONNECTED, metric 1, tag 0, timers: none
1.1.1.2/32, from 192.168.1.2, e 1/1/1 (5923)
RIP, metric 2, tag 0, timers: aging 15
1.1.1.3/32, from 192.168.1.2, e 1/1/1 (7043)
RIP, metric 4, tag 0, timers: aging 15
1.1.1.4/32, from 192.168.1.2, e 1/1/1 (5513)
RIP, metric 3, tag 0, timers: aging 15
1.1.1.5/32, from 192.168.1.2, e 1/1/1 (5514)
RIP, metric 4, tag 0, timers: aging 15
1.1.1.6/32, from 192.168.1.2, e 1/1/1 (5515)
RIP, metric 3, tag 0, timers: aging 15
1.1.1.7/32, from 192.168.1.2, e 1/1/1 (9650)
RIP, metric 3, tag 0, timers: aging 15
The output is
modified.
show ip
mtu-
profile
detail
Brocade#show ip mtu-profile detail
idx size usage ref-count
0 1500 1 default
port(s) ethe 1/1/1 to 1/1/2
1 1480 1 1
port(s) ethe 1/1/2
2 1476 0 1
Port information is
added.
show ip
ospf
virtual-
neighbor ?
Brocade# sh ip ospf virtual-neigh
Indx Transit Area Router ID Neighbor address options
1 0.0.0.200 192.168.98.111 192.213.111.111 2
Port Address state events count
4/3/1*8193.213.111.213 FULL 5 0
Port information is
added.
show dot1x
configurat
ion
ethernet
Brocade#sh dot1x configuration e 2/1/8
Port-Control : control-auto
filter strict security : Enable
Action on RADIUS timeout : Treat as a successful authentication
Authentication-fail-action : Global action
PVID State : Normal (1006)
Original PVID : 1006
Authorized PVID ref count : 1
Restricted PVID ref count : 0
Radius assign PVID ref count : 0
num mac sessions : 1
num mac authorized : 1
num Dynamic Tagged Vlan : 0
Number of Auth filter : 0
PVID state shows
as Radius in
FastIron 07.4.00
whereas it shows
as Normal in
FastIron 08.0.00a.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01