Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 76)

show command output differences between 07.4.00 and 08.0.xx
show ip
ospf area
1.2.3.4
database
link-state
network
Brocade#sh ip ospf area 0.0.0.200 database link-state network
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Net 192.113.112.113 192.168.98.113 800000be 409
0xffd2 Done
LSA Header: options: 0x02, seq-nbr: 0x800000be, length: 32
NetworkMask: 255.255.255.254
attached router: 192.168.98.113
attached router: 192.168.98.112
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Net 192.213.111.213 192.168.98.213 80000004 1063
0x6993 Done
LSA Header: options: 0x02, seq-nbr: 0x80000004, length: 32
NetworkMask: 255.255.255.0
attached router: 192.168.98.213
attached router: 192.168.98.111
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Net 192.113.111.113 192.168.98.113 80000111 1098
0x5b25 Done
LSA Header: options: 0x02, seq-nbr: 0x80000111, length: 32
NetworkMask: 255.255.255.0
attached router: 192.168.98.113
attached router: 192.168.98.111
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Net 193.213.111.213 192.168.98.213 80000005 436
0x5aa0 Done
LSA Header: options: 0x02, seq-nbr: 0x80000005, length: 32
NetworkMask: 255.255.255.0
attached router: 192.168.98.213
attached router: 192.168.98.111
Brocade#
The output format
is different. And,
new "sync state"
field is added.
show ip
ospf area
1.2.3.4
database
link-state
router
Brocade#sh ip ospf area 0.0.0.200 database link-state router
Area ID Type LS ID Adv Rtr Seq(Hex) Age Cksum
SyncState
0.0.0.200 Rtr 192.168.98.111 192.168.98.111 800001ce 260
0xafbc Done
LSA Header: options: 0x02, seq-nbr: 0x800001ce, length: 72,
flags:0x0500
link id = 193.213.111.213, link data = 193.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.113.111.113, link data = 192.113.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.213.111.213, link data = 192.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 193.113.111.0, link data = 255.255.255.0, type = stub(3)
tos count = 0, tos0_metric = 1
The output format
is different. And,
new "sync state"
field is added.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01