Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 19)

Deprecated OSPFv2 commands TABLE 6
Command Note
Global level commands (router OSPF and sub-commands)
RFC 1583-type3-cost If RFC 1583-compatibility is configured, sets the cost for advertised type 3
summary LSAs to the smallest cost of any of the component networks in
FastIron 08.0.xx.
Show command
show ip ospf error Displays OSPF warnings and errors.
show growable pool info Displays growable pool information.
Clear command
clear ip ospf area Clears OSPF area.
clear ip ospf error Clears OSPF error.
clear ip ospf graceful-restart Clears OSPF graceful-restart
clear ip ospf redistribution Clears all routes redistributed through other protocols.
OSPFv3
New OSPFv3 commands TABLE 7
Command Note
Global level command (router OSPF and sub-command)
[no] ipv6 router ospf vrf Configures OSPFv3 with a VRF index.
[no] graceful-restart helper Configures OSPFv3 graceful restart options (helper only).
[no] nonstop-routing Enables the OSPFv3 nonstop routing capability.
area decimal sub-command nssa Specifies an NSSA area.
area decimal range sub-command cost Configures area range cost.
area decimal range advertise sub-
command cost
Configures area range cost for Advertise this type-3
summarization.
area decimal range not-advertise sub-
command cost
Configures area range cost for Not Advertise this type-3
summarization.
distribute-list prefix-list ascii string in
loopback
Configures OSPFv3 distribution list using an IPv6 prefix list as
input.
OSPFv3
FastIron Ethernet Switch Software Upgrade Guide 17
53-1003089-02