Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 85)

show command output differences between 07.4.00 and 08.0.xx
show ip
rip
interface
ve 2
Interface State Change Trap: Enabled The output format
is different. Metric-
offset, Prefix List,
Route-map
information, RIP
sent/receive
statistics, and
Error information
are added.
show ip ? Virtual Interface State Change Trap: Enabled "mroute" is
removed. And, dns-
server, msdp, rtm,
ssl, and vrf are
added.
show ipsec
policy
Interface Authentication Failure Trap: Enabled The output format
is different.
show ipv6
ospf
interface
?
Virtual Interface Authentication Failure Trap: Enabled The output format
is different.
show ipv6
ospf
interface
tunnel ?
Interface Receive Bad Packet Trap: Enabled The output format
is different.
show ipv6
ospf
routes
2000:5678:
90ab:cdef:
0123:4567:
890a:bcde
Virtual Interface Receive Bad Packet Trap: Enabled The output format
is different.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01