Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 60)

show command output differences between 07.4.00 and 08.0.xx
Brocade#show ip pim
all-vrf Show all VRF
anycast-rp PIM Anycast RP info
bsr Bootstrap router
counter PIM internal counters
dense Dense-mode settings
flowcache Active PIM flow
group IP multicast group and its associated information
interface PIM interface
mcache PIM multicast cache
neighbor PIM neighbor states
nsr Multicast NSR status
optimization PIM Optimization
prune Active prunes for PIM operations
resource PIM resources
rp-candidate Candidate rendezvous point (RP)
rp-hash Multicast group to rendezvous point (RP) hash
rp-map Active multicast group to rendezvous point (RP)
mappings
rp-set List of rendezvous point (RP) candidates
rpf Find the reverse path forwarding
sparse Sparse-mode settings
traffic Active multicast traffic
vrf VRF-based PIM
Options such as
"all-vrf", "anycast-
rp", "nsr",
"optimization",
"vrf". And
Deprecate option
"error" have been
added.
show ip
pim
flowcache
1.2.3.4 ?
Brocade#show ip pim flowcache 226.1.1.1
A.B.C.D Multicast flow IP group address
| Output modifiers
Pipe option for
filtering is added.
show ip
pim prune
Brocade#show ip pim prune
Total Prune entries: 0
Prune entry count
information is
added.
show ip
pim bsr
Brocade#show ip pim bsr
PIMv2 Bootstrap information for Vrf Instance : default-vrf
------------------------------------------------------------------
This system is a Candidate BSR
BSR address: 54.0.0.54. Hash Mask Length 4. Priority 20.
Configuration:
Candidate loopback 1 (Address 25.0.0.25). Hash Mask Length 4.
Priority 20.
Next Candidate-RP-advertisment in 00:00:20
RP: 25.0.0.25
group prefixes:
224.0.0.0 / 4
Candidate-RP-advertisement period: 60
VRF category, etc.
are added.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01