Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 75)

show command output differences between 07.4.00 and 08.0.xx
show ip
ospf area
1.2.3.4
database
link-state
link-state-
id 1.2.3.4
Brocade#sh ip ospf area 0.0.0.200 database link-state link-state-id
192.168.98.111
Ospf link-state by link-state ID 192.168.98.111 are in the following:
Area ID Aging LS ID Router Seq(hex) Chksum
SyncState Type
0.0.0.200 991 192.168.98.111 192.168.98.111 800001cc 0000b3ba
Done RTR
LSA Header: options: 0x02, seq-nbr: 0x800001cc, length: 72,
flags:0x0500
link id = 193.213.111.213, link data = 193.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.113.111.113, link data = 192.113.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 192.213.111.213, link data = 192.213.111.111, type =
transit(2)
tos count = 0, tos0_metric = 1
link id = 193.113.111.0, link data = 255.255.255.0, type = stub(3)
tos count = 0, tos0_metric = 1
Area ID Aging LS ID Router Seq(hex) Chksum
SyncState Type
0.0.0.200 746 192.168.98.111 192.168.98.111 80000107 0000c618
Done SUMM
LSA Header: options: 0x02, seq-nbr: 0x80000107, length: 28
NetworkMask: 255.255.255.255
TOS 0: metric: 1
Area ID Aging LS ID Router Seq(hex) Chksum
SyncState Type
0.0.0.200 1686 192.168.98.111 192.168.98.112 800001fc 0000de08
Done SUMM
LSA Header: options: 0x02, seq-nbr: 0x800001fc, length: 28
NetworkMask: 255.255.255.255
TOS 0: metric: 2
The output format
is different. And,
new "sync state"
field is added.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01