Yokogawa Button Operated MV2000 - Manual (Page 97)

4-24 M-4662
4.5 Setting Commands
(Control)
BT Sets a batch name
Syntax BT p1,p2,p3
p1
1
p2 Batch number (up to 32 alphanumeric
characters)
p3 Lot number (up to 8 digits)
Query BT[ p1]?
Example Set the batch name configuration to batch
number PRESS5LINE and lot number 007.
BT1,PRESS5LINE,007
BU Sets a batch comment
Syntax BU p1,p2,p3
p1
1
p2 Comment number (1 to 3)
p3 Comment character sting (up to 50
characters)
Query BU[ p1,[ p2]]?
Example Set comment number 2 to “THIS_PRODUCT_
IS_COMPLETED.”
BU1,2,THIS_PRODUCT_IS_COMPLETED
UD Switches the display
To switch back to the display that was shown
before you started to change the settings with
communication commands
Syntax UD p1
p1
Screen switch (0)
Example Switch back to the display that was shown
before you started to change the settings with
communication commands.
UD0
To change to one screen display
Syntax UD p1,p2,p3
p1
Screen switch (1)
p2 Display item
TREND Trend display
DIGITAL Digital display
BAR Bar graph display
OVERVIEW Overview display
(alarm indicator)
ALARM Alarm summary display
MESSAGE Message summary display
MEMORY Memory summary display
MODBUS-M Modbus master status display
MODBUS-C Modbus client status display
RELAY Relay status display
REPORT Report display
HISTRICAL Historical display
COLUMN_BAR Stacked bar graph
p3 Group number
Example Set the display to one screen trend display and
set the group number to 4.
UD1,TREND,4
Description • The setting p2=MODBUS-M is valid only if the
serial interface protocol is set to MODBUS-M.
• The setting p2=REPORT or COLUMN_BAR
is valid only on models with the /M1 MATH
option.
To change to 4 panel display
Syntax UD p1,p2,p3,p4,p5,p6,p7,p8,p9
p1
Screen switch (2)
p2 Screen 1 type (see SY (Sets the four panel
display))
p3 Group number to be displayed on screen 1
p4 Screen 2 type (see SY (Sets the four panel
display))
p5 Group number to be displayed on screen 2
p6 Screen 3 type (see SY (Sets the four panel
display))
p7 Group number to be displayed on screen 3
p8 Screen 4 type (see SY (Sets the four panel
display))
p9 Group number to be displayed on screen 4
Example Assign group 1 to screen 1, group 2 to screen 2,
group 3 to screen 3, group 4 to screen 4, and set
all screen types to trend display.
UD2,TREND,1,TREND,2,TREND,3,TREND,4
Description This setting is valid on the RD-MV2000.
To display the specified 4 panel number
Syntax UD p1,p2
p1
Display type (3)
p2 4 panel configuration number
0 Display the specified 4 panel
configuration screen.
1–4 Display the 4 panel configuration
specified by SY (sets the four
panel display).
To set the operation screen switching
Syntax UD p1,p2,p3,p4,p5,p6,p7
p1
Screen switch (4)
p2 Automatic display switching ON/OFF
p3 Switch between all channel display and
group display (ALL, GROUP)
p4 Scale display ON/OFF
p5 Digital display ON/OFF
p6 Message display method
1 Normal display
2 List display
p7 Trend space ON/OFF
p8 Auto zone ON/OFF
p9 Fine grid ON/OFF
Example Enable the automatic display switching, switch
to the group display, set the scale display to ON,
and set the digital display to OFF.
UD4,ON,GROUP,ON,OFF
4.5 Setting Commands (Control)