Yokogawa Button Operated MV2000 - Manual (Page 108)

4-35
Commands
M-4662
1
2
3
4
5
6
7
App
Index
To send system notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7
p1
Transmitted content (SYSTEM)
p2 Recipient 1 ON/OFF
p3 Recipient 2 ON/OFF
p4 Include source URL ON/OFF
p5 Subject (up to 32 alphanumeric characters)
p6 Header 1 (up to 64 characters)
p7 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Send system notification e-mail messages
including the source URL to recipient 1. Set the
subject to “SystemAlert” and header 1 to “LP2.”
YUSYSTEM,ON,OFF,ON,SystemAlart,LP2
To send report generation notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7
p1
Transmitted content (REPORT)
p2 Recipient 1 ON/OFF
p3 Recipient 2 ON/OFF
p4 Include source URL ON/OFF
p5 Subject (up to 32 alphanumeric characters)
p6 Header 1 (up to 64 characters)
p7 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Send report generation notification e-mail
messages including the source URL to recipient
1. Set the subject to “Report” and header 1 to
“LP2.”
YUREPORT,ON,OFF,ON,Report,LP2
Description • For the contents of system notifications, see
section 2.3.
• Report generation notification can be used on
models with the /M1 math option.
• For e-mail settings, see section 2.3.
YV Sets e-mail recipient addresses
Syntax YV p1,p2
p1
Recipient selection
1 Recipient 1
2 Recipient 2
p2 Recipient address (up to 150 alphanumeric
characters)
Query YV[p1]?
Example Set recipient 1 to “[email protected]”
and “[email protected].”
YV1,[email protected] mvuser2@
daqstation.com
Description • To set multiple recipients, separate each
recipient with a space.
• For e-mail settings, see section 2.3.
YW Sets the e-mail sender address
Syntax YW p1
p1 Sender address (up to 64 alphanumeric
characters)
Query YW?
Example Set the sender address to “mvadv.”
YWmvadv
Description For e-mail settings, see section 2.3.
YX Sets the e-mail SMTP server
name
Syntax YX p1,p2,p3
p1 SMTP server name (up to 64 characters)
p2 Port number (0 to 65535)
p3 Authentication
OFF No authentication
POPBEFORESMTP Execute POP Before
SMTP
Query YX?
Example Set the SMTP server to “smtp.daqstation.com,”
the port number to “25,” and execute POP
Before SMTP.
YX smtp.daqstation.com,25,POPBEFORESMTP
Description For e-mail settings, see section 2.4.
YJ Sets a Modbus client destination
server
Syntax YJ p1,p2,p3,p4,p5
p1 Server number (1 to 16)
p2 Port number (0 to 65535)
p3 Host name (up to 64 characters)
p4 Unit number registration
AUTO Not use the unit number
FIXED Use a fixed unit number
p5 Unit number (0 to 255)
Query YJ[ p1]?
Example Set the port number of server number 3 to 502,
the host name to RD-MV2000, the unit number
registration to FIXED, and the unit number to
127.
YJ3,502,RD-MV2000,FIXED,127
4.6 Basic Setting Commands