Yokogawa Button Operated MV2000 - Manual (Page 19)

M-4662 2-5
Using
the
Ethernet
Interface
1
2
3
4
5
6
7
App
Index
Requesting/Clearing Network Information through DHCP
You can manually request or release IP address and other network information. This
operation applies when DHCP is set to Use. First switch to the network information
screen and then execute the request or release (clear) operation.
Requesting Network Information
1. Switch to the network information screen.
◊ Press FUNC > Network info
2. Request network information.
◊ Press FUNC > Network info > Request
The retrieved network information appears.
2.2 Connecting the MV