Yokogawa Button Operated MV2000 - Manual (Page 78)

4-5 M-4662
Commands
1
2
3
4
5
6
7
App
Index
Basic Setting Commands
• To activate the settings that are changed with the basic setting commands, you must
save the settings with the YE or XE command. Make sure to save the settings before
changing from Basic Setting Mode to Operation Mode. Otherwise, new settings will
not take effect.
• The settings that are returned in response to a query in Basic Setting Mode will
contain the new settings even if they are not saved. However, the new settings will
not take effect until they are saved. To activate the new settings, you must save the
settings with the YE or XE command as described earlier. If you clear the settings
or change the execution mode from Basic Setting Mode to Operation Mode without
saving the settings, the MV will return the original settings in response to a query.
Note
• The settings that are changed with the YA, YK, RU, YQ, YS, YB, YD, WS, and WW commands
are activated after saving the new settings with the XE command and then power-cycling
the MV.
• Executing the YE or LO command will disconnect communications.
Group/Command
Name Function Execution Mode Administrator User See
Page
Setting
WO
Sets alarm and DO settings Basic Setting Mode Yes No 4-28
WH Sets an alarm hysteresis Basic Setting Mode Yes No 4-28
XV Sets the scan interval Basic Setting Mode Yes No 4-28
XB Sets the burnout detection Basic Setting Mode Yes No 4-28
XJ Sets an RJC Basic Setting Mode Yes No 4-29
WU Sets environment settings Basic Setting Mode Yes No 4-29
XM Sets the memory sample condition Basic Setting Mode Yes No 4-31
RF Sets the key lock function Basic Setting Mode Yes No 4-31
RN Sets basic login settings Basic Setting Mode Yes No 4-31
RP Sets login and user limitations Basic Setting Mode Yes No 4-31
RO Sets report types and generation times Basic Setting Mode Yes No 4-32
RM Sets a report channel Basic Setting Mode Yes No 4-32
XG Sets the time zone Basic Setting Mode Yes No 4-32
XN Sets the date format Basic Setting Mode Yes No 4-33
YB Sets host information Basic Setting Mode Yes No 4-33
YD Sets network settings Basic Setting Mode Yes No 4-33
YA Sets the IP address, subnet mask, and default
gateway Basic Setting Mode Yes No 4-33
YK Sets the keepalive feature Basic Setting Mode Yes No 4-33
RU Sets DNS parameters Basic Setting Mode Yes No 4-33
WS Sets a server Basic Setting Mode Yes No 4-33
WW Sets the Web homepage Basic Setting Mode Yes No 4-34
YQ Sets the application timeout Basic Setting Mode Yes No 4-34
YT Sets the FTP transfer timing Basic Setting Mode Yes No 4-34
YU Sets the contents to be sent via e-mail Basic Setting Mode Yes No 4-34
YV Sets e-mail recipient addresses Basic Setting Mode Yes No 4-35
YW Sets the e-mail sender address Basic Setting Mode Yes No 4-35
YX Sets the e-mail SNTP server name Basic Setting Mode Yes No 4-35
YJ Sets a Modbus client destination server Basic Setting Mode Yes No 4-35
YP Sets basic Modbus client settings Basic Setting Mode Yes No 4-36
YR Sets a Modbus client transmission command Basic Setting Mode Yes No 4-36
WB Sets SNTP client settings Basic Setting Mode Yes No 4-36
WC Sets the SNTP operation when memory start is
executed Basic Setting Mode Yes No 4-36
YS Sets serial interface parameters Basic Setting Mode Yes No 4-37
4.2 A List of Commands