Yokogawa Button Operated MV2000 - Manual (Page 53)

M-4662 2-39
Using
the
Ethernet
Interface
1
2
3
4
5
6
7
App
Index
Note
About the MW100
• MW100s that support auto assignment are those with firmware version R2.22 or later.
• MW100 modules that can be automatically assigned are the following input modules. The
installable input modules vary depending on the MW100 firmware version.
4-CH, High-Speed Universal Input Module
10-CH, Medium-Speed Universal Input Module
6-CH, Medium-Speed Four-Wire RTD Resistance Input Module
10-CH, High-Speed Digital Input Module
30-CH, Medium-Speed DCV/TC/DI Input Module
10-CH, Medium-Speed Pulse Input Module
• If there are no assignable channels or the Modbus server setting is Off, auto setting fails
with an error. Check the settings.
• MW100s that are connected through auto setting automatically switches to the measurement
mode.
• MW100 port number 34324 is used to perform auto setting.
• For details on the MW100 settings, see the MW100 User’s Manual.
The first channel information of the MW100 that is automatically assigned to an external
input channel can be displayed when the cursor is on the first or last channel.
In addition, you can check the status of the connected MW100 on the Modbus status
display screen.
2.9 Reading/Writing Data on Another Device from the MV via Modbus