Yokogawa Button Operated MV2000 - Manual (Page 91)

4-18
4.4 Setting Commands (Setting)
M-4662
If p2 is set to MONTH (day/time designation)
Syntax TK p1,p2,p3,p4,p5
p1
Timer number (1 to 4)
p2 Timer designation (MONTH)
p3 Day (1 to 28)
p4 Time (hh:mm) (00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
If p2 is set to YEAR (month/day/time designation)
Syntax TK p1,p2,p3,p4,p5,p6
p1
Timer number (1 to 4)
p2 Timer designation (YEAR)
p3 Month designation (JAN, FEB, MAR, APR,
MAY, JUN, JUL, AUG, SEP, OCT, NOV,
DEC)
p4 Day designation (1 to 31) The selectable
range varies on the specified month.
P5 Time (hh:mm) (00:00 to 23:59)
p6 Timer operation (SINGLE, REPEAT)
Example Specify 8:30 on April 28 every year for timer
number 3.
TK3,APR,28,08:30,REPEAT
Query TK[ p1]?
Example Specify hour 21 every Thursday for timer number
2.
TK2,WEEK,THU,21:00,REPEAT
TU Sets an event action
Syntax TU p1,p2,p3,p4,p5,p6,p7
p1
Logic number (1 to 40)
p2 Event type
NONE
REMOTE
RELAY
Alarm output relay
SWITCH Internal switch
ALARM Alarm occurrence
TIMER Timer expiry
MATCHTIMETIMER Match time expiry
USERKEY USER key
p3 Event detail
p2=REMOTE Remote number (1 to
8)
p2=RELAY Relay number
p2=SWITCH Internal switch
number
p2=TIMER Timer number (1 to 4)
p2=MATCHTIMETIMER Match timer number
(1 to 4)
p2=Other Space
p4 Action type
MEMORYSTART/STOP
MEMORYSTART
MEMORYSTOP
TRIGGER
Event trigger
ALARMACK Alarm acknowledge
MATHSTART/STOP
MATHSTART
MATHSTOP
MATHRESET
SAVEDISPLAY Save display data to
an external storage
medium
SAVEEVENT Save event data to an
external storage medium
MESSAGE Write a message
SNAPSHOT
MANUALSAMPLE
TIMERRESET
Reset the relative timer
DISPLAYRATE1/2 Switch the trend update
rate
DISPLAYGROUPCHANGE Switch the display group
FLAG Raise a flag
TIMEADJUST Synchronize the clock
PANELLOAD Load settings
p5 Event detail 2
p4=TIMERRESET Timer number (1 to 4)
p4=DISPLAYGROUPCHANGE Group number
p4=FLAG
Flag number (1 to 8)
p4=MESSAGE Message number (1 to
100)
p4=PANELLOAD Setup file number (1 to
3)
p6 Event detail 3
p4=MESSAGE Method of specifying
the destination where
messages are written
ALL All display groups
SELECT A specified display
group
p7 Event detail 4
If p6 is set to SELECT Group number
Some p4 parameters (action type) are not
selectable depending on p2 (event type).
Some p4 parameters (action type) are not
selectable depending on the settings or on the
installation of options.
Query TU[ p1]?
Example Execute memory start with the remote control input
(terminal 1).
TUREMOTE,1,MEMORYSTART
Description Set parameter p3 (relay number, internal switch)
according to the table in section 4.3.
SK Sets a computation constant
Syntax SK p1,p2
p1
Constants number
p2 Constant (–9.9999E+29 to –1.0000E–30,
0, 1.0000E–30 to 9.9999E+29, 5 significant
digits)
Query SK[ p1]?
Example Set constants number K01 to 1.0000E–10.
SKK01,1.0000E-10
Description • You can execute this command on models
with the /M1 math option.
• You cannot execute this command while the
MV is measuring or computing.
• Set parameter p1 according to the table in
section 4.3.