Yokogawa Button Operated MV2000 - Manual (Page 124)

5-6 M-4662
5.2 Text Data Output Format
The table below lists the available text data types. This section will explain each format.
The table below indicates the data types and the corresponding output commands.
Data Type Corresponding Output Command
Setting data/basic setting data FE0,FE2
Decimal place and unit information FE1
Measured, computed, and external input data FD0
Relay and internal switch status FD6
Communication log FLCOM
FTP client log FLFTPC
Operation error log FLERR
Login log FLLOGIN
Web operation log FLWEB
E-mail log FLEMAIL
SNTP access log FLSNTP
DHCP access log FLDHCP
Modbus communication log FLMODBUS
Alarm summary FLALARM
Message summary FLMSG
Status information IS0,IS1
Ethernet information FAIP
File list MEDIR
Check disk result MECHKDSK
Manually sampled data and report data information MODIR
User information
FU0,FU1
Note
“CRLF” used in this section denotes carriage return line feed.
Setting Data/Basic Setting Data
• The MV returns the setting/basic setting data in response to an FE command.
• The MV returns the data in order as listed in the table in section 4.2, “A List of
Commands.” However, the MV does not return the setting data for the following
commands.
• Setting commands (setting)
SD and FR commands
• Setting commands (control)
All commands from BT to IR
• Basic setting commands
XE, YO, YE, and YC commands
• The output format of the setting/basic setting data conforms to the syntax of each
command.
• The MV returns multiple lines for some commands (for example, commands that are
specified for each channel).
• Syntax
The MV returns the two-character command name and subsequent parameters in the
following syntax.
EACRLF
ttsss···sCRLF
··············
ENCRLF