Yokogawa Button Operated MV2000 - Manual (Page 112)

4-39
Commands
M-4662
1
2
3
4
5
6
7
App
Index
YE Activates Basic Setting Mode
(cold reset)
Syntax YE p1
p1
Setting activation
STORE Start by saving the basic settings
ABORT Start without saving basic settings
Example Start by saving the basic settings.
YESTORE
4.7 Output Commands
(Control)
BO Sets the byte output order
Syntax BO p1
p1
Byte order
0 Transmits the data MSB first.
1 Transmits the data LSB first.
Query BO?
Example Output the data MSB first.
BO0
Description This command applies to the byte order of
numeric data for BINARY output.
CS Sets the checksum
Syntax CS p1
p1
Checksum usage
0 Not calculate (value fixed to zero)
1 Calculate
Query CS?
Example Enable (calculate) the checksum.
CS1
Description You can only use this command for serial
communications.
IF Sets the status filter
Syntax IF p1,P2
p1
Filter value of status information 1 to 4
(0.0.0.0 to 255.255.255.255)
p2 Filter value of status information 5 to 8
(0.0.0.0 to 255.255.255.255)
Query IF?
Example Set the status filter value to 1.0.4.0 and
255.127.63.31.
IF 1.0.4.0,255.127.63.31
Description See chapter 6 for details.
CC Disconnects the Ethernet
connection
Syntax CC p1
p1
Disconnection (0)
Example Disconnect the connection.
CC0
4.6 Basic Setting Commands/4.7 Output Commands (Control)