Yokogawa Button Operated DX2000 - Manual (Page 61)

1-50
IM 04L42B01-01E
Resetting the TLOG Computed Value
You can select whether to reset the TLOG computed value at each interval. The figure
below illustrates the reset operation for sum computation (TLOG.SUM).
Example: Result of the TLOG.SUM computation
1 2 3
Reset Reset Reset
Reset: On
Timer timeout
Reset: Off
When reset is On, the sum value is calculated over each interval. When set to Off, the
sum value from computation start is calculated.
Power Failure Operation, Handling of Error Data, and Handling of
Overflow Data
See “Special Data Handling” in this section.
1.8 Computation and Report Function (/M1 and /PM1 Options)