Yokogawa Button Operated DX2000 - Manual (Page 242)

6-22
IM 04L42B01-01E
• Loading the Setup Data for the Setting Mode and Basic Setting Mode
1. Carry out the procedure below to show the display.
On DXs without the /AS1 advanced security option
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to
basic setting mode), and select the File/Initialize tab > Load settings. Press the
CF or USB soft key * , and then press DISP/ENTER.
* When you are using a CF card and USB flash memory (/USB1 option).
On DXs with the /AS1 advanced security option
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch
to basic setting mode), and select the File/Initialize tab > Load settings > All
settings, Login info only, or Other settings. Press the CF or USB soft key*,
and then press
DISP/ENTER.
* When you are using a CF card and USB flash memory (/USB1 option).
2. Use DISP/ENTER and arrow keys to select the setup file to be loaded.
* Setup data files are stored in the root directory [/].
To cancel the operation, press ESC .
3. Press DISP/ENTER.
The setup data is loaded.
Note
For details on how to use the Sort key, see section 6.7.
6.9 Saving/Loading the Setup Data