Yokogawa Button Operated DX2000 - Manual (Page 248)

7-2
IM 04L42B01-01E
• Match Time
Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event
action > Match time timer.
Setup Items
• Logic box number
You can set up to 40.
• Event-Action > Event
The condition to execute the action.
Settings Description
None Not use.
Remote Select the remote control input terminal number.
Relay Select the alarm output relay number. During Edge operation, a change from
deactivated to activated is an event.
Relay-Off *2 Select the alarm output relay number. During Edge operation, a change from
activated to deactivated is an event. During Level operation, the action states
that correspond to “activated” and “deactivated” are the opposite of when you
select “Relay.”
Switch Select the internal switch number. During Edge operation, a change from off to
on is an event.
Switch-Off *2 Select the internal switch number. During Edge operation, a change from on to
off is an event. During Level operation, the action states that correspond to “on”
and “off” are the opposite of when you select “Switch.”
Timer Select the timer number.
Matchtime Select the match timer number.
Alarm During Edge operation, a change from “no alarms are active” to “at least one
alarm is active” is an event.
Alarm-Off *2 During Edge operation, a change from “at least one alarm is active” to “no
alarms are active” is an event. During Level operation, the action states that
correspond to “at least one alarm is active” and “no alarms are active” are the
opposite of when you select “Alarm.”
UserKey -
Edge *1 Select the event switch number (1 to 30). This function is available for release
numbers 3 and later.
Level *1 Select the event switch number (1 to 30). During Edge operation, a change
from off to on is an event.
LevelOff *2 Select the event switch number (1 to 30). During Edge operation, a change
from on to off is an event. During Level operation, the action states that
correspond to “on” and “off” are the opposite of when you set the event to
“Level.”
*1 Available for release numbers 3 and later.
*2 Available for release numbers 4 and later.
7.1 Setting the Event Action Function
(Including the remote control function of the /R1 and /PM1 options and the USER key)