6 displaying channels in display zones, Displaying channels in display zones -12 – Yokogawa Button Operated DX2000 User Manual
Page 189
5-12
IM 04L42B01-01E
5.6 Displaying Channels in Display Zones
Specify a waveform display zone for each channel so that waveforms do not overlap.
For a description of the function, see section 1.3.
Setup Screen
Press
MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Zone, Scale, Bar graph.
Setup Items
• First-CH/Last-CH
Select the target channels. The target channels are common with the other items that
are displayed on the screen.
• Zone > Lower, Zone > Upper
Sets the zone in which the waveform is displayed. You can set
Lower and Upper as
a position (%) when taking the maximum display width to be 100%. Set
Upper greater
than
Lower, and the zone width (Upper – Lower) greater than or equal to 5%.
Lower: 0 to 95%
Upper: 5 to 100%