Yokogawa Button Operated DX2000 - Manual (Page 107)

Measurement Channels and
Alarms
3-11
IM 04L42B01-01E
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
3.7 Setting Alarms on Channels
Set the alarms after setting the range. All alarm settings of a channel are cancelled in the
following cases.
• When the input type (
Volt, TC, etc.) is changed.
• When the input range is changed.
• When the upper or lower limit of the span or scale is changed on channels that are set
to linear scale, square root computation, or 1-5 V (including changes in the decimal
point position).
Setup Screen
• Alarms for Each Channel
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Range, Alarm.
• Alarm Delay Time
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Tag, Memory sample, Alarm delay.
On DXs without the /AS1 advanced security option