Yokogawa Button Operated DX2000 - Manual (Page 133)

4-4
IM 04L42B01-01E
4.2 Displaying the Measured Data as Waveforms,
Values, or Bar Graphs
This section explains how to use the trend, digital, and bar graph displays.
For a description of the function, see section 1.3.
Procedure
• Showing the Display
1. Press DISP/ENTER to show the display selection menu.
2. Press the arrow keys to select TREND, DIGITAL, or BAR, and press DISP/
ENTER.
The selected display appears.
• Changing the Displayed Contents
1. Press DISP/ENTER to show the display selection menu.
2. Press the right arrow key to display the sub menu.
3. Press the up and down arrow keys to select the sub menu item.
TREND SPACE ON: Inserts a space at the right edge (horizontal display)
or the top edge (vertical display) in the waveform
display area
TREND SPACE OFF: Does not insert a space
Group name: Displays the group
ALL CHANNEL: Displays the waveforms of all channels
GROUP CHANNEL: Displays the waveforms of the
channels registered to groups
AUTO ZONE ON: Displays trend waveforms
separately by assigning each
channel in the group to separate
display areas (zones)
AUTO ZONE OFF: Does not display waveforms in zones
SCALE ON: Displays the scale
SCALE OFF: Clears the scale
FINE GRID ON: Displays the fine grid
FINE GRID OFF: Clears the fine grid
TAG DETAIL ON: When a tag does not fit into the typical tag display
space, the alarm and measured values are covered
so that the tag can be displayed completely.
TAG DETAIL OFF: Priority is not given to tag display.
DIGITAL OFF: Clears the numeric display section
DIGITAL ON: Displays the numeric display section
MESSAGE DISP1: Displays the messages using display method 1
MESSAGE DISP2: Displays the messages using display method 2
Trend display sub menu
(Not displayed with the default settings. To display, see section 5.18.)
AUTO SCROLL ON: Automatically switches the
displayed groups
AUTO SCROLL OFF: Does not automatically switch
the displayed groups