Yokogawa Button Operated DX2000 - Manual (Page 298)

11-5
IM 04L42B01-01E
Troubleshooting
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• Execution Errors
Code Message Explanation/Countermeasures/Ref. section
150 This action is not possible because sampling is in progress. Stop the memory sampling and then execute.
See section 6.4.
151 This action is not possible during sampling or calculating. Stop the memory sampling and then execute.
See sections 6.4 and 9.4.
152 This action is not possible because saving is in progress. Wait until the saving is complete.
153 This action is not possible because formatting is in progress. Wait until the formatting is complete.
154 Message not accepte because message limit was reached. The limit is 50 messages.
See section 5.4.
155 The message is not written while sampling is stopped. Start the memory sampling and then execute.
See section 6.4.
156 There are no channels to be saved to the memory. Set the channels to be saved.
See sections 6.1 and 9.1.
157 This function is not possible at this time. Check the DX status.
158 Exceeds time deviation setting. When synchronizing the clock through remote control.
When you specified time that exceeds the time deviation
limit on DXs with Advanced security function (/AS1
option). (Firmware version number 4.11 and later)
See section 2.3.
159 It is outside the postscript message write-in range. Add message can be written to the past section of the
data being memory sampled.
See section 5.4.
162 Data storage is already started. Memory sampling is in progress on the batch group.
See section 3.2 in IM04L41B01-03E.
163 Data storage is already stopped. Memory sampling on the batch group has already been
stopped.
See IM04L41B01-03E.
164 This action is not possible because there is a bar code data
error.
Check the text that the barcode reader scanned.
See section 2.11.
170 End process can’t proceed, because setting file is not saved to
Media.
When you switch from setting mode to operation mode
or basic setting mode, the DX automatically saves the
changed settings to the CF card. This message appears
when the DX cannot save the changed settings. Check
the CF card.
See section 1.5 in the advanced security manual.
173 Data save is not possible because of insufficient media
capacity.
Change the external storage medium.
174 Cannot execute because of failure to save unsaved setting file. The DX cannot save an unsaved setting file to the CF
card. Check the CF card.
See the advanced security manual.
175 The calibration due date has not been set properly. Check the year, month, and day of the calibration due
date.
See section 3.13
700 The specified command does not exist. The command specified from the custom display is not
registered. Register commands whose command type
is “E-M,” and specify the numbers of those commands
in the custom display.
See section 1.10 in the communication manual.
See section 2.32 in IM04L41B01-04E.
701 Saving data. The previous transmission is not finished.
See section 1.10 in the communication manual.
702 Failed to save data. Check for communication errors or Modbus server
errors.
See section 1.10 in the communication manual.
760 Cannot find KDC server. The KDC server cannot be found in the same domain.
See section 1.14 in the communication manual.
761 KDC server connection error. An error occurred while the DX was connecting to the
KDC server.
See section 1.14 in the communication manual.
764 Not supported by this machine. Not supported by the DX.
See section 1.14 in the communication manual.
11.1 A List of Messages