Yokogawa Button Operated DX2000 - Manual (Page 321)

13-3
IM 04L42B01-01E
Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
13.2 Display Function
Display
Item Specifications
Display* 10.4-inch TFT color LCD (640 × 480 dots)
Brightness 6 levels
Backlight saver function Dim or turn off the LCD backlight if there is no key operation for a specified time.
* A section of the LCD monitor may contain pixels that are always on or off. The brightness of the LCD may also not be uniform
due to the characteristics of the LCD. This is not a malfunction.
Displayed Information
Item Specifications
Display groups Assign channels to groups on the trend display, digital display, and bar graph display and display.
Number of groups 36
Number of channels that can be assigned to each group
Up to 10
Display color Channel: Select from 24 colors
Background: Select white or black (excludes the Overview, Alarm annunciator, and Custom
displays. See the item on the Historical trend display for information on that
display.)
Trend display (T-Y display)
Waveform line width Select from 1, 2, and 3 dots
Display method Orthogonal axis display with time axis (T) and measured value axis (Y)
Layout:
Vertical, horizontal, wide, or split
Trend interval: 5 s, 10 s (release number 3 or later), 15 s, 30 s, 1 min, 2 min, 5 min, 10 min, 15
min, 20 min, 30 min, 1 h, 2 h, 4 h, and 10 h/div for the DX2004 and DX2008.
15 s (only in fast sampling mode; release number 3 or later), 30 s, 1 min, 2 min,
5 min, 10 min, 15 min, 20 min, 30 min, 1 h, 2 h, 4 h, and 10 h/div for the DX2010,
DX2020, DX2030, DX2040, and DX2048.
Switchable to the secondary trend interval.
Scale Display a scale for each channel.
Current value bar graph, color scale band, and alarm point marks can be displayed on the scale.
Others Grid (divisions: 4 to 12), trip line (line width: 1, 2, or 3 dots), message, zone display, partial
expanded display, auto zone display (release number 3 or later), fine grid (release number 3 or
later), and tag detail display (release number 3 or later)
Trend display (circular display)
Display method
Time axis: Circle, Measured value axis: Perimeter
Time per revolution: Select from the available settings between 20 min and 4 weeks (20 min
available only on the DX2004 or DX2008).
Display format: Full circle display and quarter cycle display
Digital Display Displays measured values numerically
Update rate 1 s (scan interval if the scan interval is greater than 1 s)
Bar graph display Displays the measured value on a bar graph
Direction Vertical or horizontal
Base position End or center
Update rate 1 s (scan interval if the scan interval is greater than 1 s)
Scale Display a scale for each channel
Color scale band, and alarm point marks can be displayed on the scale.
Historical trend display (T-Y display)
Redisplays the display data or event data in the internal memory or external storage medium.
Display format All screen or half screen (only when the display data is being redisplayed)
Top channel (release number 3 or later): Displays the specified channel in front of all the others.
Auto span display (release number 3 or later): Automatically adjusts the display span of the
specified channel.
Auto zone display (release number 3 or later): Displays channels in different zones.
Time axis operation The time axis can be reduced or expanded, and data can be displayed continuously. The time
display can be switched from absolute to relative time (release number 3 or later).
Add message Messages can be added.
Background color Select from white, cream, black, or light gray.
Data search Waveforms from the internal memory can be displayed through the specification of a date and time
(release number 3 or later).